The United States shale gas boom will benefit the United States Plastic customers benefit
According to foreign media reports in Washington in September 4th, the United States Accenture David Jankovic and Paul Bujiasaike wrote in an article: as a result of the North American shale gas boom, a large number of new polymer production capacity...
Yangzi petrochemical ethylene production has more than 550 thousand tons
This year, a good time to seize the Yangzi Petrochemical olefin product profitability Chuangxiao, keep the ethylene unit stable production of high load, 1-8 months of this year, ethylene production exceeded 550 thousand tons, an increase of 1.58% yie...
Baling Petrochemical in accordance with the law to safeguard the legitimate rights and interests of two case
August 23rd, Baling Petrochemical from Hunan Yueyang City Intermediate People's Court issued a civil ruling, rejected a restaurant owner asked the company to ask 200 thousand yuan compensation for housing damage retrial. This effect lasted for 4 year...
LG chemical will restart Li water naphtha cracking device
South Korea LG chemical industry leader recently announced, will restart the naphtha cracker in Lishui on Thursday. According to the company spokesman said the set of annual production capacity of 1 million 160 thousand tons of equipment previously d...
The Ministry of environmental protection issued five new standards for pollutant discharge
Learned from the Ministry of environmental protection, to implement the State Council "air pollution prevention action plan" and "water pollution prevention action plan", through the transformation and upgrading of the formulation and revision of emi...
The present situation and Prospect of the unsaturated polyester resin industry in China
China's UPR production, consumption has been ranked first in the world, the production capacity of 2 million tons / year, production of more than 1 million tons / year, the United States in 2004 production of 870 thousand tons. "Fifteen" during the s...
Asia Pacific Auto industry development peak new materials new technology new model
Meeting background: "Car changed the world, and the world is also changing the car", with the birth of unmanned, car Internet era has come. Lightweight, intelligent environmental protection has become the main development direction of the current ca...
The twelfth session of China Zhengzhou Industrial Equipment Expo boost manufacturing transformation and upgrading of Henan
The twelfth Chinese hosted the 2016 Zhengzhou industrial equipment exhibition and intelligent manufacturing and equipment exhibition by Chinese Mechanical Engineering Institute, Henan Province Federation of industrial economics, Haiming international...
Electrostatic analysis of blow molding production
Electrostatic charge will result in the following problems when the molten state of the plastic body falls to the open mold: 1 when there is more than one blank on each die, the electrostatic charge always has the same polarity. This type of billet ...
Plastic line of the world, the full implementation of the automobile lightweight
Many parts on the car, such as: bumper, wheel cover, license plate, dashboard, door, knob, and even the engine cover, air intake system, etc., are used as raw materials for plastic. With the strengthening of energy-saving emission reduction and safet...
The largest 3D print pieces were recorded by Guinness ABS and carbon fiber composites
Oak Ridge National Laboratory (ORNL) a 3D print cooperation and Boeing won today's Guinness records, becoming by far the largest 3D print, if the test is successful, will be used for the Boeing 777x aircraft manufacturing. The 3D print by ABS plastic...
The key technologies of methanol to ethanol in Dalian chemical industry were identified by the results.
Dalian Institute of Chemical Physics Chinese Academy of Sciences and Shandong Union Chemical Limited by Share Ltd to cooperate in the development of the key technology of methanol ethanol methanol phase carbonylation of methyl acetate in test technol...
33 reasons for the production of black spots in all products
One, what is the thin wall injection molding Thin wall injection molding technology is also known as thin wall plastic parts injection molding technology. About its definition of the following three: A: the flow length and thickness ratio L/T, flow...
33 reasons for the production of black spots in all products
First, the cause of the mold: (1) in addition to the full inspection of oil before, can effectively prevent the oil and rust stains products and runner material mixed with crushed material and be used (especially in the production process appears ra...
Baling Petrochemical epoxy resin increased customer demand oriented export
At the end of August, Baling Petrochemical epoxy resin division of epoxy resin export orders this year reached 3000 tons, an increase of 15%. This is their customer demand oriented, innovative export model, to promote the product export stage results...
The United States children's products plasticizer is expected to detect the burden
It is understood that the United States to ban toys and children's products plasticizer in a total of 8 species, the content should not exceed 0.1%, the implementation of the new regulations will help enterprises to reduce the cost of children's prod...
